Cream · 50 mins

Herbal cream

A cream is a skincare preparation applied directly to the skin. It combines two main elements: an oil-based part, which nourishes and softens the skin, and a water-based part, which provides freshness and hydration. The oil-based part can be made with a vegetable oil, such as sweet almond oil, or a herbal infused oil. Herbal infused oils can be prepared at home by soaking plants in oil, but it is also possible to buy ready-made herbal infused oils. For the water-based part, a hydrosol, also known as floral water, is often used. It is an aromatic water produced during the distillation of plants. Many different hydrosols are available, including rose, lavender, geranium, rosemary and chamomile, allowing you to choose one that best suits the preparation you want to make. The hydrosol can also be replaced with a herbal infusion or decoction. However, these preparations are more susceptible to the growth of microorganisms, so the resulting cream generally has a shorter shelf life. Since oil and water do not naturally mix, they need to be combined to form an emulsion. Beeswax helps give the preparation its consistency, while blending creates a smooth and even cream. The texture can be adjusted according to preference: the less hydrosol you use, the thicker and richer the cream will be. Using more hydrosol will produce a lighter, more fluid cream. The choice of oil also affects the final texture: some oils create a richer, more nourishing cream, while others give it a lighter feel.

Ingredients & equipment

  • A measuring jug with a pouring spout
  • A deep glass mixing bowl (bio)
  • A saucepan for the double boile
  • A whisk or electric hand mixer
  • A kitchen thermometer
  • A scale
  • A spatula or spoon
  • Small clean, sterilised jars

Preparation

  1. Prepare the oil base
  2. Pour 100 ml of herbal infused oil into the glass mixing bowl and add the beeswax.
  3. Place the bowl in a double boiler and heat gently, stirring until the beeswax has completely melted
  4. Remove the preparation from the fire at 50°C
  5. Prepare the water base
  6. Pour the hydrosol/infusion/decoction into the measuring jug and warm it in the double boiler
  7. Monitor the temperature, when it reaches approximately 50°C, remove it from the heat. Avoid heating it any further
  8. The emulsion phase
  9. Once the beeswax has completely melted, remove the oil and beeswax mixture from the double boiler
  10. Immediately begin whisking the oil mixture with a whisk or electric hand mixer
  11. While continuing to whisk, pour the warm hydrosol/infusion/decoction into the oil mixture very slowly in a thin, steady stream
  12. Keep mixing continuously so that the oil and water gradually combine and form a smooth cream
  13. Keep whisking until the cream reaches room temperature and no longer feels warm to the touch
  14. Transfer the finished cream into small, clean, sterilised jars, close them and store the cream in the refrigerator

Tip

This cream contains water, which makes it more susceptible to the growth of bacteria, yeasts and moulds than a water-free ointment. Vitamin E or certain essential oils can be added to help slow down contamination. When making a homemade cream, it is therefore important to use thoroughly clean equipment, prepare small batches and store the cream in the refrigerator.

Precautions and contraindications

As a precaution, seek advice from a health professional before any use, particularly during pregnancy or breastfeeding, in children, or if you are on medication.

This information is provided for guidance only, to help you get to know plants better. Before any use, seek advice from a health professional and follow their recommendations.

← Using plants